Signs your house needs a rewire
By Liam, OHMS GROUP LTD ·
Wiring does not come with an expiry date, but it does age. Insulation dries out, connections loosen, and installations that were fine decades ago were never designed for the number of appliances a modern household runs. The only way to know the real condition of your wiring is to have it inspected and tested, but there are signs that tell you it is time to ask.
Warning signs to look out for
Old cable types
If you can see cables in the loft, under the stairs or at the consumer unit, look at the outer sheath. Rubber insulated or fabric covered cable belongs to installations from many decades ago, and rubber insulation in particular becomes brittle and can crumble. Black or lead sheathed cable is another sign of a very old installation. Modern cable is PVC sheathed, usually grey or white.
A fuse box with rewireable fuses
A board with ceramic fuse carriers and fuse wire, or a mixture of old boxes and switches, tells you the installation has had little attention for a long time. That does not prove the wiring is unsafe, but it usually means there is no RCD protection, and the board itself may be the first thing to change.
Scorch marks, buzzing and warm fittings
Brown marks around sockets or switches, a burning smell, crackling or buzzing, or a plug that gets hot in a socket are all signs of a poor connection or an overloaded circuit. Stop using the outlet and get it checked. This one is not something to leave until you have time.
Flickering lights and frequent trips
An occasional trip often points to a faulty appliance. Lights that flicker for no obvious reason, or a circuit that keeps tripping when nothing new has been plugged in, can point to deteriorating wiring or loose connections.
Not enough sockets
Rooms full of extension leads and adaptors are a sign the installation has not kept up with how the house is used. Adding sockets is not always a rewire, but it is worth knowing the condition of the existing circuits before extending them.
No earthing to light fittings
Some older lighting circuits have no protective earth conductor. That limits which fittings can safely be installed, especially metal ones, and is a common finding in older homes.
How to find out for certain
An Electrical Installation Condition Report is the proper starting point. The electrician tests each circuit, checks the earthing and bonding, and records any problems with a code. The report shows whether the installation can be repaired and improved, or whether the faults are widespread enough that a rewire is the sensible answer. Our guide to EICR codes explains how to read the results.
Many homes do not need a full rewire. A new consumer unit, better bonding and a handful of repairs can bring an installation up to a good standard. Where the cable itself is failing, though, patching it only puts off the inevitable.
Full or partial rewire
A partial rewire replaces some circuits, such as the kitchen or an extension, and leaves sound circuits in place. A full rewire replaces everything from the consumer unit to the last light switch. The test results usually make the choice clear.
A rewire is also a chance to put sockets, lights and data points where you actually want them. Plan positions room by room before work starts, because moving them afterwards means opening walls again.
What a rewire involves
- A survey and an agreed plan of socket, switch and light positions
- Lifting floorboards and chasing walls to run new cables, with dust sheeting and tidy working
- A new consumer unit with RCD protection, and main bonding brought up to standard
- Testing and an Electrical Installation Certificate on completion
- Plastering and redecoration afterwards, which is usually arranged separately
Installing new circuits and a new consumer unit is notifiable work under Part P of the Building Regulations, so make sure you receive the right certificates at the end.
Older homes in Aylesford and Medway
Plenty of homes around Aylesford, Larkfield and Medway still have boards and wiring from the 1970s and 80s, and some older terraces have even earlier work hidden behind later alterations. If you are buying, renovating or simply unsure, start with a test. See our rewires and consumer unit service and our EICR inspections, or call 01622 278762 for a free survey and quote.
Common questions
How do I know if my house needs rewiring?
Signs include rubber or fabric covered cable, a fuse box with rewireable fuses, scorched sockets and frequent unexplained trips. An EICR confirms it either way.
Can I live in the house during a rewire?
Often yes, with the work phased room by room. It is disruptive, so plan around dust, power being off during the day and redecorating afterwards.
Does a rewire need building regulations sign off?
Yes. New circuits and a new consumer unit are notifiable under Part P, so the work must be certified through a competent person scheme or building control.
